C. Deodorizing Control
O
Auto Fan Speed for Cooling Operation
Following eight patterns repeat over and over for auto fan speed. Each pattern persists one second.
O
Auto Fan Speed for Heating Operation
Refer to Piping Temperature Control.
This type of control is applicable on Cooling Mode and Soft Dry Mode operating only.
1. During cooling or soft dry operation with automatic fan speed, the unit will operate as state below for deodorizing
purpose.
Note*:Fan speed is automatic for cooling mode and Slo for soft dry mode.
22
CS-PE9CKE / CU-PE9CKE / CS-PE12CKE / CU-PE12CKE
To Next Page
Loading...
