63
5.Detach connectors as labeled from the electronic controller.
CN-FM!
CN-STM1
CN-DISP1
CN-STM3
CN-DISP2
Figure 3
Figure 4
6.Release the
CN-STM3
wire and CN-STM1
wire from the C-box
hook.
Figure 5
7.Remove screw and
pull out the C-box
complete.
Figure 6
8.Pull out the right
control cover.
Figure 7
9.Detach AC2 connectors and
release black lead wire(AC1)
and red lead wire(DATA) from
terminal board.
10.Pull out main controller board
gently by releasing the hooks.
To Next Page
Loading...
