43
WARNING
15. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged
sufficiently before proceeding with repair work. Failure to heed this caution may result in electric shocks.
1. Open the intake grille and pull it to the horizontal position.
2. Pull up the intake grille until it falls off.
1. Remove the two caps at the discharge port (right and left) and then release the two screws on both sides.
Removal Procedure for Intake Grille
Removal Procedure for Front Grille
&D
To Next Page
Loading...
