Panasonic CS-RE18JKE User Manual (English)

Other manuals for Panasonic CS-RE18JKE

Questions and Answers:

S
Shannon LittleAug 29, 2025
What does H99 error mean on my Panasonic CS-RE18JKE Air Conditioner?
- J
  Jennifer SantosAug 29, 2025
  If your Panasonic Air Conditioner displays the error code H99, several issues could be the cause: * A clogged air filter in the indoor unit. You should clean or replace the air filter. * Dust accumulation on the indoor unit heat exchanger. Clean the heat exchanger. * An air short circuit. Fix any air short circuit issues. * A faulty indoor pipe temperature sensor. Test or replace the indoor pipe temperature sensor. * A faulty indoor unit PCB. Check the indoor unit PCB.
L
lisamorseAug 28, 2025
What causes F98 error on Panasonic Air Conditioner?
- N
  Nicole ChandlerAug 28, 2025
  If your Panasonic Air Conditioner shows error code F98, it indicates an over-current issue. This could be due to: * Compressor failure. Inspect and replace the compressor if necessary. * A defective outdoor unit PCB. Replace the outdoor unit PCB. * A defective inverter main circuit electrolytic capacitor. Check and replace if necessary. * Excessive refrigerant. Check for refrigerant leaks or excess.
K
Katherine MahoneyAug 27, 2025
How to fix H11 error on Panasonic CS-RE18JKE Air Conditioner?
- D
  daniel13Aug 27, 2025
  If your Panasonic Air Conditioner is showing the H11 error code, it indicates a signal transmission error or a PCB fault. Here’s what you should check: * Inspect the indoor and outdoor unit PCBs. * Verify the wiring between the indoor and outdoor units. * Inspect the connection wires between the indoor and outdoor units for any breaks. * Check the power supply waveform.
S
salazarjaredAug 27, 2025
What does error code H98 mean on a Panasonic CS-RE18JKE?
- S
  smithrichardAug 27, 2025
  If your Panasonic Air Conditioner displays the error code H98, it could be due to: * A clogged air filter in the indoor unit. Clean or replace the air filter. * Dust accumulation on the indoor unit heat exchanger. Clean the heat exchanger. * An air short circuit. Fix any air short circuit issues. * A faulty indoor pipe temperature sensor. Test or replace the indoor pipe temperature sensor. * A faulty indoor unit PCB. Check the indoor unit PCB.
J
Jeffrey RoachAug 25, 2025
What to do if my Panasonic Air Conditioner shows F91 error?
- K
  kevinblackburnAug 26, 2025
  If your Panasonic Air Conditioner displays error code F91, it could be due to several reasons: * A refrigerant shortage, possibly due to a refrigerant leak. You should check for leaks. * Poor compression performance of the compressor. In this case, inspect and replace the compressor if necessary. * A closed 2/3 way valve. Ensure this valve is properly open. * Faulty indoor intake air or indoor pipe temperature sensors. Consider testing or replacing these sensors.
P
Patrick Weaver PhDAug 22, 2025
Why is my Panasonic CS-RE18JKE Air Conditioner remote control not working?
- M
  Matthew BarronAug 22, 2025
  If the remote control for your Panasonic Air Conditioner isn't working, ensure the batteries are inserted correctly and replace them if they are weak. The display might be dim or the transmission signal weak.
C
Cheryl HenrySep 10, 2025
What does error H14 mean on my Panasonic CS-RE18JKE Air Conditioner?