100
17. Disassembly and Assembly Instructions
WARNING
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
17.1 Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor
Removal Procedures
17.1.1 To Remove Front Grille
Figure 1
17.1.2 To Remove Power Electronic Controller
Figure 2
3 Hold both sides of the front grille and
remove it by pulling up and toward
yourself gently.
1 Lift to open the horizontal vane
gently.
2 Remove 2 caps and 3 screws at the
bottom of discharge vane.
4 Removing the contro
board cover by
releasing the hook.
Hook
www.ampair.co.uk | sales@ampair.co.uk
To Next Page
Loading...
