Unit CS-V9DKE CU-V9DKE
Air Circulation Description Cross-flow Fan Propeller Fan
Material ASG20k1 PP Resin
Motor Type Induction (4-poles) Induction (6-poles)
Input W 47 69
Rated Output W 15 30
Fan Speed Low rpm Cooling; 780 —
Medium rpm Cooling; 980 —
High rpm Cooling; 1,160 830
SuperHigh rpm Cooling; 1,310 —
Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium (Pre Coat) Aluminium (Blue Coat)
Fin Type Slit Fin Corrugate Fin
Row / Stage (Plate fin configuration, forced draft)
2 × 15 1 × 20
FPI 21 17
Size (W × H × L) mm 610 × 315 × 25.4 835.1 × 508 × 22
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (cm
3
) — FV50S (350)
Refrigerant (R-410A) g (oz) — 930 (32.8)
Thermostat Electronic Control —
Protection Device — Overload Protector
Capillary Tube Length mm — Cooling; 675
Flow Rate l/min — Cooling; 9.0
Inner Diameter mm — Cooling; 1.4
Air Filter Material
Style
P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 25 µF, 370VAC
Fan Motor Capacitor µF, VAC 1.5 µF, 440VAC 2.0 µF, 440VAC
•
Specifications are subject to change without notice for further improvement.
10
CS-V7DKE CU-V7DKE / CS-V9DKE CU-V9DKE / CS-V12DKE CU-V12DKE
To Next Page
Loading...
