46
12.2.4.1 Wire Stripping Connecting and Requirement
Do not joint wires.
OR
OR
OR
Use complete wire without joining.
Use approved socket and plug with earth pin.
Wire connection in this area must follow to national wiring rules.
5 mm or more
Indoor/outdoor
connection
terminal board
(gap between wires)
No loose
strand when
inserted
10 ± 1 mm
Wire stripping
ACCEPT
Conductor
fully inserted
PROHIBITED
Conductor
over inserted
PROHIBITED
Conductor not
fully inserted
CAUTION
Do not connect power supply to indoor and
outdoor unit at the same time.
Risk of fi
re if wrong connection of power supply.
WARNING
RISK OF FIRE
JOINING OF WIRES
MAY CAUSE
OVERHEATING AND
FIRE.
To Next Page
Loading...
