To Next PageTo Next PageWhat to do if my Panasonic Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit isn't working, first check if the circuit breaker has tripped. Also, verify if any timers have been set that might be preventing the unit from turning on.
How to improve the efficiency of HEAT/COOL mode on my Panasonic Air Conditioner?
To improve the efficiency of the HEAT/COOL mode on your Panasonic Air Conditioner: ensure the temperature is set correctly, close all doors and windows, and clear any obstructions from the air inlet and outlet vents.
What to do if the power cord of my Panasonic CS-Z60UD3EAW Air Conditioner becomes unnaturally warm?
If the power cord of your Panasonic Air Conditioner becomes unnaturally warm, turn off the power supply, unplug the unit, and consult an authorized dealer.
What to do if the switches or buttons on my Panasonic Air Conditioner are not functioning properly?
If the switches or buttons on your Panasonic Air Conditioner are not functioning properly, turn off the power supply, unplug the unit, and consult an authorized dealer.
General| Cooling Capacity | 6.0 kW |
|---|---|
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
Instructions for operating the unit, read thoroughly and keep for future reference.
Guide to starting/stopping, selecting operation mode, and setting desired temperature.
Safety warnings regarding use by children and general precautions, including hazard symbols.
Warning about R32 flammability and specific installation/handling precautions.
Requirements for service personnel and safety procedures for work on refrigerant systems.
Table of diagnostic display codes and their corresponding abnormalities or protection controls.
Conditions requiring immediate consultation with an authorised dealer, such as abnormal noise or non-functioning buttons.
