16
How to use
FAN SPEED
To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
MODE
To select operation mode
AUTO - For your convenience
HEAT - To enjoy warm air
COOL - To enjoy cool air
DRY - To dehumidify the environment
QUIET/
POWERFU
To switch between quiet &
powerful
QUIET POWERFUL NORMAL
QUIET: To enjoy quiet operation
• This operation reduces airflow noise.
OFF
/
ON
TEMP
TIMER/CLOCK
MODE
QUIET/
POWERFUL
FAN SPEED
MODE
CHECK RESET
AIR SWING
OFF/ON
CANCELCLOCK
SET
SELECTUP
DOWN
AC RC
Remote control display
Press and hold
for approximately
10 seconds to show
temperature setting
in °C or °F.
Press to restore the
remote control to
previous setting.
Not used in normal
operations.
Not applicable
POWERFUL: To reach temperature quickly
• This operation stops automatically after 20
minutes.
• To eliminates the POWERFUL indicator after 20
minutes operation, press
QUIET/
POWERFU
button again.
Can be activated in all modes and can be
cancelled by pressing the respective button again.
Daily timer setting
To turn ON or OFF the unit at a preset time.
TIMER/CLOCK
CANCELCLOCK
SELECT
3
4
1
2
1
Press TIMER
MODE
to enter timer mode
• Press once to change the display from clock
to timer or vice-versa.
• Press for 4 seconds to change the display
from daily timer to weekly timer or vice-
versa.
2
Select ON or OFF timer Example:
OFF at 22:00
OFF/ON
3
Set the time
UP
DOWN
4
Confirm
SET
• To cancel, press
CANCE
.
• When ON timer is set, the unit may start early
before the actual set time in order to achieve
the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set.
• The timer closest to the current time will be
activated first.
• If timer is cancelled manually or due to power
failure, you can restore the previous setting by
pressing
SET
.
ACXF55-17690_book1.indb 16ACXF55-17690_book1.indb 16 12/7/2017 5:07:02 PM12/7/2017 5:07:02 PM
To Next Page
Loading...
