Panasonic CT-1388YD

-6-
Video/Audio In & Out Connection
CT-2788YD and CT-2789VYD
The IN and OUT terminals located on the back of Monitor directly pass the input signals through the out
terminals, so you may monitor or record the external video/audio information.
Operation
1. Connect an external video/audio source to the Monitor video/audio input terminals as shown.
2. Select video mode by pressing the TV/VIDEO button.
3. Connect an external video/audio source (Monitor or VCR) to the video/audio
output terminals as shown.
4. The output terminals will provide the same signals as the input terminals for monitoring or
recording.
Note: Video/Audio IN and OUT terminals will operate whether the Monitor is ON or OFF.
S-Video In & Out Connection
CT-2788YD and CT-2789VYD
The IN and OUT terminals located on the back of Monitor directly pass the input signals through the out
terminals, so you may monitor or record the external video/audio information.
Note: Video/Audio IN and OUT terminals will operate whether the Monitor is ON or OFF.
• S-Video connection is optional and overrides the standard Video connection when connected.
Operation
1. Connect an external video/audio source to the Monitor Input terminals as shown.
2. Select video mode by pressing the TV/VIDEO button.
3. Connect audio output to external video/audio source (Monitor or VCR) terminals as shown.
4. The output terminals will provide the same signals as the input terminals for monitoring or
recording.
MONITOR OUT
AUDIO
VIDEO
AUTO 75 /HIGHΩ
IN
OUT
S-VIDEO
R
L
OUTPUT
AUDIO
VIDEO
AUTO 75 /HIGHΩ
R
L
INPUT
AUDIO
VIDEO
AUTO 75 /HIGHΩ
R
L
OR
Monitor VCR
External Audio/Video Equipment
MONITOR OUT
AUDIO
VIDEO
AUTO 75 /HIGHΩ
IN
OUT
S-VIDEO
R
L
OUTPUT
AUDIO
VIDEO
AUTO 75 /HIGHΩ
R
L
INPUT
AUDIO
VIDEO
AUTO 75 /HIGHΩ
R
L
External Audio/Video Equipment
OR
Monitor
VCR