EasyManua.ls Logo

Panasonic CT-20G21 - Trilingual Menu System; Care & Cleaning; Power Loss

Panasonic CT-20G21
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Set-up Features (cont.)
Trilingual Menu System
Located On Remote Control
The Language Menu is factory set to ENGLISH. Follow
these instructions to change the Language Menu to
Spanish or French and back to English.
1. Press the ACTION button to display the Main
Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the SET-UP Icon.
3. Press the ACTION button to display the Set-Up
Menu.
Selects or Adjusts
Features When
Menu is Displayed
Highlight Desired
Feature When
Menu is Displayed
Displays and Exits Menus
Helpful Hints:
Language selection Menu does
Caption transmitted information.
not affect Close
4. Press the CH UP or DOWN button to highlight
"ENGLISH ESPANOL FRANCAIS."
5. Press the VOL LEFT or RIGHT button to select
"ENGLISH", "ESPANOL" or "FRANCAIS".
6. Press the ACTION button twice to exit the Set-Up
Menu.
Picture Tube (Turn set off)
Use a mild soap solution or window cleaner and a clean cloth. DO NOT USE ABRASIVE CLEANERS. Avoid excessive
moisture and wipe dry.
Plastic Cabinets
Wipe the cabinet with a soft cloth dampened with water or a mild detergent solution and wipe dry with a soft clean cloth.
Avoid excessive moisture. Do not use benzene, thinners or other petroleum based cleaners.
Wood Cabinets
When dusting or polishing the cabinet, use a clean soft cloth and stroke straight with the grain. An occasional coat of
furniture polish will help preserve the finish. Do not use benzene, thinners or other petroleum based cleaners. Do not
place objects made of plastic or rubber directly on top of the cabinet. A chemical reaction could result causing permanent
marring of the finish.
Remote Control Transmitter
Do not use benzene, thinnersor other petroleum based cleaners to clean the Remote Control Transmitter. Toclean, wipe
with a soft cloth slightly moistened with a mild detergent and then wipe dry with a soft clean cloth.
Power Loss
Prolonged power interruption causes the following features to reset to their factory preset state.
FEATURE FACTORY PRESET STATE
POWER OFF
VOLUME APPROX.-I/3
CHANNEL CH 03
PROGRAM MEMORY UNPROGRAMMED
VIDEO MENUS NORMALIZED
STEREO/SAP/MONO STEREO
FEATURE FACTORY PRESET STATE
CLOCK NOT SET
SLEEP TIMER NO/OFF
TIMER NO/OFF
ANTENNA MODE CABLE
TVNIDEO TV
TRILINGUAL MENU ENGLISH
- 21 -

Related product manuals