Do you have a question about the Panasonic CT-2707DF and is the answer not in the manual?
General guidelines for safe servicing and equipment protection.
Precautions for handling high-voltage equipment and picture tubes safely.
Procedure to check for leakage current with the AC cord unplugged.
Procedure to check for leakage current with the AC cord plugged in.
Information on X-ray radiation sources and measurement procedures.
Test procedure for the horizontal oscillator disable circuit.
Important cautions and procedures when working with lead-free solder.
Recommendations for types of lead-free solder suitable for use.
Guidance on identifying and handling surface mount chip components.
Steps for safely removing leadless and chip components from the PCB.
Procedure for installing surface mount chip components onto soldering pads.
Step-by-step instructions for replacing flat integrated circuits.
List of tools and equipment required to check the circuit.
Step-by-step instructions for performing the circuit check.
Explains the function of each button on the remote control.
Guide to abbreviations used for resistor types and tolerances.
Guide to abbreviations used for capacitor types and tolerances.
Explanation of symbols, designations, and notes used in schematic diagrams.
Guidelines for taking voltage measurements and common issues.
Guidelines for taking waveform measurements and equipment settings.
Schematic details and differences for various A-Board models.