Panasonic CY-VMC7000U - Page 26

VOLUME
MENUMUTE MODE NAVI
NAVIGATION ASPECT
P
·
MODEPOWER
ASP
ENTER
CY-VMC7000U
IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER
DISC/BAND
TRACK/
YUNE
ENTER
29
CY-VMC7000U
20
E
N
G
L
I
S
H
How to Set Your ID Code (For the First Time)
q
Enter an ID code of 4 digits using the buttons [0] to
[9] on the remote control.
Note: When you are setting your ID code for the
first time, it is not necessary to enter the old ID code.
w
Enter the ID code of 4 digits again using the buttons
[0] to [9] on the remote control.
How to Change Your ID Code
q
Enter the preset (old) ID code of 4 digits using the
buttons
[0] to [9] on the remote control. If the
wrong ID code is entered, a new ID code cannot be
registered.
w Enter a new ID code of 4 digits using the buttons [0]
to [9] on the remote control.
e Enter the new ID code of 4 digits again using the
buttons
[0] to [9] on the remote control.
How to Cancel the Known ID Code
q
Enter the preset (old) ID code of 4 digits using the
buttons
[0] to [9] on the remote control. If the
wrong ID code is entered, it is not possible to cancel
the ID code function.
w Press and hold [ENTER] until display the
"Complete!".
The ID code cancelling procedure is completed. The unit now works without an ID code.
Note: Press [MODE] to return to the regular mode.
3
[ENTER]
1
2
3
4
5
6
7
8
9
A
0
1
2
3
4
5
6
7
8
9
0
[}] [{]
[]] [[]
(Select)
[ENTER]
[MODE]
[MENU]
[0]
to [9]
(ID code input)
Enter an ID code by using the remote control.
Note: Should your unit ever require service, cancel your
ID code before sending for repair.