Panasonic CY-VMC7000U - Page 44

47
CY-VMC7000U
38
E
N
G
L
I
S
H
P
R
N
D
2
L
P
a
n
a
s
o
n
i
c
REVERSE
CY-VMC7000U
Control Unit
(Front)
CY-VMC7000U
Display Unit
(Rear)
!6 Power Connector
(Video)
(Yellow)
Rear View Camera
Rear View Camera
Control Unit
(Video)
(Yellow)
Video output
Camera input
RCA Cord (Option)
Reverse Lead
(Violet / white stripe)
Reverse Lamp
Clip Connector
Battery
Vehicle Chassis
Transmission Gear
Cut here
Check the reverse lamp.
* Take it out of the back of the tail lamp mount.
Connecting the Reverse Lead
* In case using an optional rear view camera, the reverse
lead must be connected.
¡Connect the reverse lead (violet / white stripe) to the posi-
tive (+) lead of the reverse lamp (the lamp with a clear lens
that lights when the transmission gear is shifted into the
reverse position).
Notes: ¡Connect the reverse lead after cutting the terminal at the end.
¡Use a Reverse Extension Cord !7 if needed.
Connection with Rear View Camera
Note: Refer to the operating instructions for the connected devices, in addition.