Panasonic CZ-RTC4A

10
To set the weekly program, follow the steps.
1
Select the program you want to
set in the program confi rmation
mode, and press [SET]. This enters
the setting mode of the program
currently displayed.
* In the program setting mode, [SETTING],
“hour”, “minute” and “item” fl ash on the
display.
Program step1
Program step2
A
2 / 3 / 44 1 / 2 / 3 / 4
2
Set the “hour”. (Program step 1)
Press [▼/▲] to set the “hour”.
Confi rm the “hour” and press [SET]. This
enters the program changing mode
(setting of the “minute”).
3
Set the “minute”. (Program step 2)
Press [▼/▲] to set the “minute”.
Confi rm the “minute” and press [SET].
The unit enters (the program pattern
selection mode).
SET
SET
SET
SET
CANCEL,DEL
program check
CANCEL
CANCEL,DEL
CANCEL
PROGRAM
PROGRAM
Program
Changing hour digits
Changing minute digits
Changing patterns
Selecting copy source
Selecting copy destination
normal remote controller
SET,CANCEL,DEL
SET,CANCEL
Changing the Program Timer
Weekly Program Function