Panasonic CZ-RTC4A

22
Using the remote controller, you can switch the nanoe™X/ECONAVI function ON/OFF.
1
Press [nanoe™X/ECONAVI]
• Each time the button is pressed, the
function changes in the following order.
A
°
1 / 2
1 / 2
nanoe™X ON
ECONAVI ON
nanoe™X OFF
ECONAVI ON
nanoe™X ON
Exit setting
* When nanoe™X/ECONAVI is enabled,
will appear.
2
* When the indoor unit is stopped,
will disappear.
Note
● Turn the ECONAVI function OFF if:
- You want to maintain the room temperature at a set temperature.
- You want to keep air conditioner running while nobody is in a room.
- The sensor fails.
- Only infants, babies, or people only with disabilities are in the room.
WARNING
Do not use the ECONAVI function in a room with disabled persons or infants only.
Due to their limited motions, the ECONAVI sensor may judge no person is present,
causing the indoor unit to stop the operation.
ON/OFF setting of nanoe™X/ECONAVI function
nanoe™X/ECONAVI Function