Panasonic CZ-RTC5

11
(EN)
 Menu items (1 to 13)
1
Basic
instructions
Explains the basic
operations.
• Press Ż Ź to turn the
page.
P.8
2
FLAP
*
Sets ß aps for each indoor
unit.
P.12
3
Lock indiv.
ß ap
*
Fixes the ß ap of a speciÞ c
air outlet.
P.13
4
ON/OFF
timer
Sets the ON/OFF timer P.14
5
Weekly timer
Sets the operation
schedule on a daily basis.
P.15
6
Filter info
*
ConÞ rms and resets the
time to Þ lter cleaning.
P.20
7
Outing
function
Prevents the room
temperature from
increasing to much (or
decreasing too much)
when no one is the room.
P.33
8
Quiet
operation
*

Performs quiet operation
for outdoor units.
P.22
9
Power
consumption
monitor
*
ConÞ rms the power
consumptions on a daily,
weekly or yearly basis.
P.23
10
Energy
saving
The energy saving
functions shown on the
right can be set individually
aside from the
(Energy
saving) button.
11
Initial
settings
12
Ventilation
*
Sets ventilation operation
including the heat
exchange ventilation unit.
P.40
13
Setting list
ConÞ rms the meanings of
setting information icons.
P.41
 No. 10 [Energy saving] details
ECONAVI
The ECONAVI sensor
detects human activity
and conserves energy
based on the activity level.
P.24
Temp auto
return
Restores the temperature
after the set time has
elapsed even if the
temperature is changed.
P.26
Temp range
Restricts the temperature
range that can be set.
P.27
Auto shutoff
Sets the auto shutoff
timer.
P.28
Schedule
peak cut

Determines the time zone
for the energy saving
operation.
P.30
Repeat off
timer
Stops operation after a
certain period of time
each time operation is
performed.
P.32
 No. 11 [Initial settings] details
Clock
Sets the present date and
time.
P.35Clock type
Sets the type of clock
display.
Operation
lock
Locks the button
operations.
Controller
name
Names the remote
controller.
P.36
Touch
sound
Turns the operation sound
ON/OFF.
P.37
Contrast Sets the screen contrast.
Backlight
Sets the backlight
brightness of the screen.
Language
Sets the display language
for the top screen.
Password
change

Sets the administrator
password.
P.38
Temp
sensor

Sets whether to use the
temperature sensor of the
remote controller or the
indoor units.
P.39
Main/sub

Set this when 2 remote
controllers are connected.
Vent
output

Interlocks the ON/OFF
of the air conditioner and
ON/OFF of the fan.
Contact
address
ConÞ rms the contact
address and telephone
number for servicing.
* Depending on the model, some menus cannot
be used. The following display appears.
The administrator password is required for
setting. (P.38)