12
(EN)
Flap Setting for Each Indoor Unit
FLAP
When setting ß aps for each indoor unit
• Flaps of all air outlets of 1 indoor unit face the same
direction.
1
Display the menu screen.
To return to the previous screen
Press .
To return to the top screen
Press 2 times.
2
Select [FLAP].
Ÿ ź ĺ
3
Select the indoor unit to set.
Ÿ ź ĺ Ź
• ALL: All units connected to the remote
controller
e.g. (unit) ALL ĺ 1-1 ĺ 1-2 to 1-8
4
Select the ß ap direction.
Ÿ ź ĺ
(Press 2 times to Þ nish.)
• Pressing Ÿ or ź during swing
can stop the ß ap at your
preferred position.
• Pressing Ÿ or ź while swing is stopped
sets the ß ap at the speciÞ ed position.
When Ÿ is pressed
When ź is pressed
• 3-level adjustment is possible for Cool
and Dry mode.
Swing
e.g. unit 1-1 e.g. unit 1-3
To Next Page
Loading...
