42
(EN)
Setting information icon list
Icon Description Page
[Lock indiv. ß ap] is set. P.13
Switching between Heat and Cool/Dry mode is prohibited (Switching to Auto
mode is also prohibited.).
–
Remote control operation is restricted by a central control device. –
The indoor unit Þ lter needs to be cleaned. P.20
The engine oil needs to be replaced (only when the gas heat pump air
conditioner is used).
–
[ON/OFF timer] is set. P.14
[Weekly timer] is set. P.15
Energy saving operation is in process. P.8
The operation capacity of the outdoor unit is restricted. –
[Schedule peak cut] is set. P.30
[Temp auto return] is set. P.26
[Temp range] is set. P.27
[Auto shutoff] is set. P.28
[Repeat off timer] is set. P.32
[Quiet operation] is set. P.22
The temperature sensor of the remote controller is detecting the room
temperature.
P.39
[Operation lock] is set. P.35
Fresh air is used for ventilation.
(Only when connecting a heat exchange ventilation unit or connecting a
commercially sold fan)
P.40
[Outing function] is set. P.33
Setting List
To Next Page
Loading...
