Play menu-Changethe play sequence ]
This function works only when the elapsed play time is displayed.
Repeat play
• All _ _ (excluding MP3 discs)
• Chapter _ _ _
• Group _ _ (MP3 discs only)
• PL (Play list) _
• Track _ _'_'_
Select "OFF" to cancel.
Video menu-Changethe picture quality ]
Picture
eNormah Default setting
eSoft: Soft picture with fewer video artifacts
eFine: Details are sharper
eOinema: Mellows movies, enhances detail in dark scenes.
eUser: You can make further adjustments.
Contrast
Increases the contrast between light and dark parts of
the picture.
Brightness
Brightens the picture.
Sharpness
Adjust the sharpness of the edges of the horizontal
lines.
Color
Adjusts the shade of the picture's color.
Gamma
Increases the brightness of the center ranges to improve
detail and contrast in dark scenes.
3D NR
Reduces overall noise.
integrated DNR
Reduces mosaic noise and character smudging.
MPEG-DNR (When any item other than "User" is selected)
You can turn the recommended settings for 3D NR and
Integrated DNR on and off.
Progressive _(m page 46)
Select "ON" to enable progressive output.
eSelect "OFF" if the picture is stretched horizontally.
eWhen progressive output is on, closed captions cannot be
displayed.
Transfer [When Progressive'(.., above) is setto"ON".]
Select the method of conversion for progressive output to suit
the type of material being played (.., page 46, Film and
video).
eAutol (normal):
Detects 24 frame-per-second film content and
appropriately converts it.
eAuto2: Compatible with 30 frame-per-second film content
in addition to 24 frame-per-second film content.
(Picture distortion may occur depending on the
content)
eVideo: Select when using "Auto1" and "Auto2", and the
video content is distorted.
I Audio menu-Change the sound effect I
(Only with Dolby Digital with 2 or more channels)
Enjoy a surround-like effect if you are using two front
speakers only.
• Turn V.S.S. off if it causes distortion.
• V.S.S. does not work for SAP recordings.
Dialog Enhancer _
(Dolby Digital, 3-channel or over only, including a center channel)
The volume of the center channel is raised to make dialog
easier to hear.
Status messages appear on the television during operation to show
the condition of the unit.
Press [STATUS].
The display changes each time you press the button.
eDisplayed information are examples.
Transfer (dubbing) progress indicator
Available recording time
Recording mode
and recording mode
Date and time Used HDD space
I
Play position within the title
Title number and elapsed time during play
Title number and elapsed time during recording
No display
e_
Only when you have selected "480P" in "TV Type" (,- page 12).
RQT7305
To Next Page
Loading...
