Panasonic DLP PT-D6000

Appendix
Technical Information
ENGLISH - 44
The network function of the projector supports PJLink™ class 1, and the PJLink™ protocol can be used to perform
projector setting and projector status query operations from a computer.
J Control commands
J PJLink™ security authorization
When using PJLink™ with security authorization, either of the password set for administrator privileges and
the password set for user privileges with web browser control can be used as the password for PJLink™.
When using PJLink™ without security authorization, set use without the password for administrator privileges
and the password for user privileges of web browser control.
PJLink™ is a pending trademark in Japan, the United States, and other countries and regions. For
specifications regarding PJLink™, refer to the Japan Business Machine and Information System Industries
Association website.
URL: http://pjlink.jbmia.or.jp/
PJLink
TM
protocol
Command Control details Parameters/Notes
POWR Power supply control 0 = Standby 1 = Power ON
POWR ? Power supply status query
0 = Standby
2 = Cool-down in progress
1=Power ON
2 = Warm-up in progress
INPT Input selection
11 = RGB1
21 = VIDEO
31 = DVI-D
12 = RGB2
22 = S-VIDEO
32 = SDI (PT-DZ6710E only)
INPT ? Input selection query
AVMT Shutter control
30 = Shutter mode off (picture mute cancelled)
31 = Shutter mode on (picture mute)
AVMT ? Shutter mode query
ERST ? Error status query
1st byte: Indicates fan errors, range 0 - 2.
2nd byte: Indicates lamp errors, range 0 - 2.
3rd byte: Indicates Temperature errors, range 0 - 2.
4th byte: Indicates cover open errors, range 0 - 2.
5th byte: Indicates filter errors, range 0 - 2.
6th byte: Indicates other errors, range 0 - 2.
Definitions for each value from 0 - 2 are as follows.
0 = No error known
1 = Warning 2 = Error
LAMP ? Lamp status query
1st digits (1 - 5 digits):
2nd digit:
3rd digits (1 - 5 digits):
4th digit:
Lamp 1 cumulative operating time
0 = Lamp 1 off, 1 = Lamp 1 on
Lamp 2 cumulative operating time
0 = Lamp 2 off, 1 = Lamp 2 on
INST ? Input selection list query
The following are returned as parameters.
“11 12 21 22 31” for PT-DZ6700E
, PT-DW6300E and PT-D6000E
“11 12 21 22 31 32” for PT-DZ6710E
NAME ? Projector name query The name set for PROJECTOR NAME in NETWORK menu.
INF1 ? Manufacturer name query “Panasonic” is returned.
INF2 ? Model name query “DZ6710, DZ6700, DW6300 or D6000 is returned.
INF0 ? Other information query Information such as version number is returned.
CLSS ? Class information. “1” is returned