13
(ENG) VQT2M46
• When the camera is used in the following conditions, a gap may occur between
the camera and the card/battery door or terminal cover, causing water to leak
and malfunction.
– When there are foreign objects, such as lint, hair, sand, etc., between the card/
battery door or terminal cover and the camera.
– When the rubber seal has deteriorated.
– When the [LOCK] switch is not closed on the card/battery door and terminal
cover.
Causes of water leak
A: Water will leak through
the gap formed.
B: water
C: Terminal cover
D: Card/Battery door
E: Hair and lint
F: Sand and dust
G: Crack and deformation
H:Fluid
DMC-FT2&TS2GN-VQT2M46_eng.book 13 ページ ２０１０年２月９日 火曜日 午前８時４６分
To Next Page
Loading...
