Panasonic DMC-FT2 - Camera Settings; Setting Date;Time (Clock Set); Changing the clock setting

23
(ENG) VQT2M46
Setting Date/Time (Clock Set)
• The clock is not set when the camera is shipped.
• [PRECAUTIONS] is displayed. Be sure to check this so that you can
maintain the waterproof performance. (P7)
Press [MENU/SET].
Press 2/1 to select the items (year,
month, day, hour, minute, display
sequence or time display format),
and press 3/4 to set.
‚: Cancel without setting the clock.
Press [MENU/SET] to set.
Press [MENU/SET].
• Press [‚] to return to the settings screen.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1.
•
It can be changed in steps 3, 4 and 5 to set the clock.
Press the [OFF/ON] button.
A [MENU/SET] button
B Cursor buttons
Changing the clock setting
DMC-FT2&TS2GN-VQT2M46_eng.book 23 ページ ２０１０年２月９日 火曜日 午前８時４６分