Panasonic DMC-FT2 - Setting the Menu; Switching between menus

VQT2M46 (ENG)
24
Setting the Menu
This section describes how to select the Normal Picture Mode settings, and
the same setting can be used for the [PLAYBACK] menu and [SETUP] menu
as well.
Example: Setting [AF MODE] from [
Ø] to [š] in the Normal Picture Mode
Press [MENU/SET] to close the menu.
Press [MENU/SET] to display the menu.
Press 3 / 4 to select [AF MODE], and then
press 1.
• Depending on the item, its setting may not appear or it
may be displayed in a different way.
Press 3/4 to select [š] and then press
[MENU/SET] to set.
Switching to other menus
e.g.: Switching to the [SETUP] menu
1 Press [MENU/SET] to display the menu.
2 Press 2.
3 Press 4 to select the [SETUP] menu icon
[].
4 Press 1.
•
Select a menu item next and set it.
DMC-FT2&TS2GN-VQT2M46_eng.book 24 ページ ２０１０年２月９日 火曜日 午前８時４６分