111
Recording
∫ About the flash
Flash mode is set to [Œ] when the flash is closed, and [ ] (AUTO) when it is open.
When the flash is open, the camera automatically sets [ ], [ ] (AUTO/Red-Eye
Reduction), [ ], or [ ] to match the type of subject and brightness.
•
Open the flash when the flash is to be used. (P123)
• When [ ] or [ ] is set, Digital Red-Eye Correction is enabled.
• Shutter speed will be slower during [ ] or [ ].
∫ Functions that work automatically and menu options which are disabled
The following functions are performed automatically to allow the camera to make the
optimal settings.
– Scene Detection/Backlight Compensation/Face Detection/Auto White Balance/
Intelligent ISO sensitivity control/[Red-Eye Removal]/[i.Resolution]/[i.Dynamic]/[Long Shtr
NR]/[Shading Comp.]/[Quick AF]/[AF Assist Lamp]
Because the camera makes the optimal settings automatically, the following menus are
disabled.
–
For the [Rec] menu, see “Using the [Rec] Menu” in (P158). For the [Motion Picture] menu,
see
“Using the [Motion Picture] Menu” (P188).
– [Cust.Set Mem.]/[Expo.Meter]/[AF/AE Lock]/[AF/AE Lock Hold]/[Quick AF]/[Eye Sensor AF]/
[Direct Focus Area]/[Shutter AF]/[AF Assist Lamp]/[AF+MF] ([Custom] menu)
• The Backlight Compensation
– When there is a backlight, the subject appears darker and the camera will automatically
attempt to correct it by increasing the brightness of the picture. In Intelligent Auto Mode,
backlight compensation works automatically.
To Next Page
Loading...
