64
Preparation
Entering Text
It is possible to enter babies’ and pets’ names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
1
Display the entry screen.
• You can display the entry screen via the following operations.
– [Name] in [Face Recog.] (P174)
– [Name] of [Baby1], [Baby2] or [Pet] in [Profile Setup] (P176)
– [Location] in [Travel Date] (P46)
– [Title Edit] (P196)
– [LUMIX CLUB], [Device Name], [External AV device], [Wi-Fi Password], [Register to
Favorite] (P215) in the [Wi-Fi Setup] (P244) menu.
2
Press 3/4/2/1 to select text and then press
[MENU/SET] to register.
• Move the cursor to [ ] and then press [MENU/SET] to switch
text between [A] (capitals), [a] (lower case), [1] (numbers) and
[&] (special characters).
• To enter the same character again, rotate the control dial right to move the cursor.
• The following operations can be performed by moving the cursor to the item and
pressing [MENU/SET]:
– []]: Enter a blank
– [Delete]: Delete a character
– [ ]: Move the entry position cursor to the left
– [ ]: Move the entry position cursor to the right
3
Press 3/4/2/1 to move the cursor to [Set] and then press
[MENU/SET] to end text input.
• Text can be scrolled if all of the entered text does not fit on the screen.
To Next Page
Loading...
