Panasonic DMC-GH3KBODY - Changing the Firing Mode (Manual Flash;Wireless Flash)

129
Recording
Applicable modes:
You can set a flash type at [Firing Mode] in [Flash].
•
When [MANUAL] is set, the luminosity ratio ([1/1], etc.) is displayed on the flash icon on the
screen.
• When [WIRELESS] is set, [WL] is displayed on the flash icon on the screen.
1 Select [Flash] in the [Rec] menu. (P37)
2 Press 3/4 to select [Manual Flash Adjust.] and then press [MENU/SET].
3 Press 2/1 to select an item and then press [MENU/SET].
•
You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].
Changing the firing mode (Manual flash/wireless flash)
Item Description of settings
[TTL]
The camera automatically sets the flash output.
[MANUAL]
Set the luminosity ratio of the flash manually. In [TTL] you can shoot the
photograph you want even when shooting dark scenes that may
otherwise be too brightly lit by the flash.
[WIRELESS]
Set when using an external flash with a wireless connection (optional).
Setting the luminosity ratio (When [MANUAL] is selected)