202
Playback/Editing
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically or rotate pictures manually in 90o steps.
1 Select [Rotate] on the [Playback] menu. (P37)
•
The [Rotate] function is disabled when [Rotate Disp.] is set to [OFF].
2 Press 2/1 to select the picture and then press [MENU/SET].
•
The [Rotate] function is disabled for Group Pictures.
3 Press 3/4 to select the direction to rotate the picture and
then press [MENU/SET].
:
The picture rotates clockwise in steps of 90o.
:
The picture rotates counter-clockwise in steps of 90o.
•
Exit the menu after it is set.
1 Select [Rotate Disp.] on the [Playback] Mode menu. (P37)
2 Press 4 to select [ON] and then press [MENU/SET].
•
The pictures are displayed without being rotated when you select [OFF].
• Exit the menu after it is set.
• When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by “JEITA (Japan Electronics and
Information Technology Industries Association)”.
• It may not be possible to rotate pictures that have been recorded with other equipment.
• [Rotate Disp.] is disabled during Multi Playback.
[Rotate]/[Rotate Disp.]
[Rotate] (The picture is rotated manually)
[Rotate Disp.] (The picture is automatically rotated and displayed)
To Next Page
Loading...
