128
Recording
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1 Select [Flash] in the [Rec] menu. (P37)
2 Press 3/4 to select [Flash Adjust.] and then press [MENU/SET].
3 Press 2/1 to set the flash output and then press [MENU/SET].
•
You can adjust from [j3 EV] to [i3 EV] in steps of [1/3 EV].
• Select [n0] to return to the original flash output.
• [i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
• It can be set only when [Firing Mode] in [Flash] is set to [TTL]. (P129)
• You can also adjust the flash output by pressing [ ] and rotating the front dial. (P133)
• The [Flash Adjust.] setting also applies to an external flash. (excluding the wireless flash)
(P265)
Applicable modes:
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of
the built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
•
For details on Exposure Compensation, see P133.
• The [Auto Exposure Comp.] setting also applies to an external flash. (P265)
Adjust the flash output
Synchronising the output of the built-in flash to the Exposure
Compensation
To Next Page
Loading...
