147
Recording
When selecting [ ]
You can set the focus position precisely by enlarging the screen.
•
The focus position cannot be set at the edge of the screen.
1 Select [ ] and press 4.
2 Press 3/4/2/1 to set the focus position and then press
[MENU/SET].
•
The assist screen is enlarged to approximately 5 times original
size.
• The assist screen can also be displayed by touching the subject.
3 Press 3/4/2/1 to align the subject on the cross point of the crosshair in the
center of the screen.
• The focus position
can also be set by dragging the screen.
• Press [DISP.] to return the focus position to the center of the screen.
• On the assist screen, it is also possible to record a picture by touching [ ].
∫ Move the AF area easily with [Direct Focus Area] function
When the [Direct Focus Area] in the [Custom] menu is set to [ON] while [š], [ ] or [Ø]
is selected, it is possible to move the AF area directly with the cursor button.
With [ ], you can move the enlarged position.
•
The spot metering target can also be moved to match the AF area when the [Metering Mode]
(P162) is set to [ ]. At the edge of the screen, the metering may be affected by the brightness
around the AF area.
• [Direct Focus Area] is fixed to [OFF] in Creative Control Mode.
• When using digital zoom, the position and size of the AF area cannot be changed.
To Next Page
Loading...
