58
Preparation
• Refer to P90 for details.
• If you set [Expo.Meter] to [ON], [Expo.Meter] is displayed when
operating Program Shift, the aperture setting and the shutter speed.
• Unsuitable areas of the range are displayed in red.
• When [Expo.Meter] is not displayed, switch the display information
for screen by pressing [DISP.]. (P72)
• The [Expo.Meter] disappears after approximately 4 seconds if no operation is performed.
• Refer to P73 for details.
• Refer to P72 for details.
[Highlight]
When the Auto Review function is activated or when playing back,
white saturated areas appear blinking in black and white.
This does not affect the recorded image.
[ON]/[OFF]
•
If there are any white saturated areas, we recommend
compensating the exposure towards negative (P133)
referring to the histogram (P57) and then taking the
picture again. It may result in a better quality picture.
• This does not work while in Multi Playback, Calendar
Playback, or Playback Zoom.
[ON] [OFF]
[Constant Preview]
[OFF]/[ON]
[Expo.Meter]
Set whether or not to display the exposure meter.
[ON]/[OFF]
[LVF Disp.Style]
This will set the display style of the viewfinder.
[]: Viewfinder style
[]: Monitor style
[Monitor Disp. Style]
This will set the display style of the monitor.
[]: Viewfinder style
[]: Monitor style
2
00
250 15
4.02.8 5.6 8.0
3060125
0
SSS
F
604.0
To Next Page
Loading...
