62
Preparation
• Monitor display and viewfinder display can be switched manually by pressing [LVF]. (P66)
[Eye Sensor]
It will switch automatically to viewfinder display when an eye or
object gets near the viewfinder using an eye sensor. It will return
to monitor display when it goes away.
[Sensitivity]:
This will set the sensitivity of the eye sensor.
[HIGH]/[LOW]
[LVF/Monitor Auto]:
Enables/disables the eye sensor.
[ON]/[OFF]
[Touch Settings]
Enables/disables the Touch operation.
When set to [OFF], no corresponding touch tab or touch icon is
displayed on the screen.
[Touch Screen]:
All touch operations. When set to [OFF], only button and dial
operations can be used.
[ON]/[OFF]
[Touch Tab]:
Operation to display the touch icons by touching tabs such as [ ]
displayed on the right of the screen.
[ON]/[OFF]
[Touch AF]:
Operation to focus on the touched subject.
[ON]/[OFF]
[Touch Pad AF]:
Using the monitor as a touch pad when the viewfinder is in use. (P67)
[EXACT]/[OFFSET]/[OFF]
[Touch Scroll]
This allows you to set the speed of continuously forwarding or
rewinding pictures using touch operation.
[
H]: High speed
[L]: Low speed
To Next Page
Loading...
