Panasonic DMC-TZ18 Lumix - Setting the Clock; Setting the Menu

14 VQT3H42 (ENG) (ENG) VQT3H42 15
Setting the clock Setting the menu
Refer to the following procedures to operate the menus.
Example: Setting [LCD Mode] from [OFF] to in the [Program AE]
Mode
Press [MENU/SET] to display the menu
Switching to the [Setup] menu
Select [Setup], and press [MENU/SET].
Press ▲▼ to select [LCD Mode]
and then press [MENU/SET]
• Depending on the item, its setting may not
appear or it may be displayed in a different
way.
Press ▲▼ to select and then
press [MENU/SET] to set
Press [ / ] several times to
close the menu
The clock is not set when the camera is shipped.
Turn on the power ( )
Press [MENU/SET] ( ) while
the message is displayed
Press ◄► to select the items
(year, month, day, hour, minute,
display order or time display
format), and press ▲▼ to set
• To cancel → Press [ / ].
Press [MENU/SET]
Confirm the setting and press [MENU/SET]
• To return to the previous screen, press [ / ].
• Turn on the power again and check the time display.
■
To change time setting
Select [Clock Set] from the [Rec] or [Setup] menu, perform and .