14
[CASE 2. Other than "After replacing Main P.C.B."]
To display the "TZ81" model suffix, press the DELETE button.
• Step 5. The cancellation of "STRICT MODE":
Press DISPLAY
button, then Strict in the upper right corner of the LCD display will disappear.
• Step 6. Chose the model suffix in "INITIAL SETTINGS": (Refer to "CAUTION")
[Caution: After replacing Main P.C.B.]
(Especially, other than "DMC-TZ80EG/EF/EB/EP and DMC-TZ81" models)
The model suffix can be chosen, JUST ONE TIME.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can not be changed.
Therefore, select the area carefully.
Select the area with pressing "UP
/ DOWN of Cursor buttons".
To Next Page
Loading...
