37
9.4.4. Removal of the 2nd Lens Frame
Unit
1. Turn the Straight Frame using Slotted Driver, etc. and
then align the Groove of Straight Frame and Groove of
Both Side Cam Frame Unit.
2. Remove the 2nd Lens Frame Unit from the Both Side
Cam Frame Unit.
9.5. Assembly Procedure for Lens
9.5.1. Insert the 2nd Lens Frame Unit
1. Turn the Straight Frame in the direction of arrow, then
align the convex portion of Straight Frame and the
concave portion of Both Side Cam Frame Unit.
* Refer to the OIS Drive Lever portion of Straight Frame
as shown below.
To Next Page
Loading...
