" Connecting
to
your
TV,
via HDMI
AV
OUT
Connecting
to
a television
-"HOMI
Video Mode" and "HOMI Audio
Output" should be set to "On".
(~
32)
-To
experience better sound consider
adding a surround sound receiver, using
connections
0,
0,
G or (i).
(~
12, 13)
-The
HOMI connection supports VIERA
Link "HDAVI Control"
(~
26) when used
with a compatible Panasonic
TV.
HOMI
compatible
television
o
HDMIIN
-IB055~
"Analog Audio
Outpuf
should be
set to "2ch (Oownmix)
+ 5.1ch".
(~32)
- The Component Video cable does not
carry audio. so you must also connect the
land
Raudio channels using the Audio/
Video cable.
-
To
experience better sound consider
adding a surround sound receiver, using
connections
0,0,
G
or
Ci).
(~
12,13)
(Unplug the red and white plugs.)
- Connect terminals of the same color.
-Set
the "Black
level
Control" to "Darker".
(~31)
-Using
the COMPONENT VIDEO OUT
terminal, while playing OVO-Video, the
video output resolution is limited
to
"480p".
-Be
sure your
TV
supports at least 480p.
Set "Component Video Resolution"
to
"480p", "720p"
or
"1080i".
(~
32)
-If
this unit is connected to an amplifier/
receiver, etc. via
an
HOMI cable with
"HOMI Video Mode" set
to
"On"
(~
32),
the video will be fixed
to
480i.
-[B055I: "Analog Audio Outpuf' should be
set to "2ch (Oownmix)
+ 5.1ch".
(~
32)
- Using the two analog audio channels this
connection provides, you will not be able
to use any surround sound audio modes.
-
To
experience better sound consider
adding a surround sound receiver, using
connections
0,
G,
G or
Ci).
(~
12, 13)
(Unplug the red and white plugs.)
-Conneclterminals
of the same color.
- High definition video cannot be viewed
using this connection.
To
view high
definition video. please use connection
types
0 or
0.
(0) above)
AUOIONIOEO
IN
Television
Back
of
the
unit
AudloNideo
cable
(included)I,-=-=-=-,,:==~-
Television
Back
of
the
unit
o Connecting
to
your
TV,
via COMPONENT VIDEO OUT
e Connecting
to
your
TV,
via VIDEO OUT
2ch AUDIO OUT
~
'--
-----l
---J~
RQT9243
To Next Page
Loading...
