(~
I
I
I
Linked operations with the TV (VIERA
Link™
"HDAVI ControI™'')
What is VIERA Link "HDAVI Contro'''?
VIERA
Link™
is a new name for EZ Sync™.
VIERA
Link
"HDAVI
Control"
is a convenient function that offers linked operations of
this
unit, and a Panasonic TV (VIERA)
or
ampllfler/receiver under "HDAVI
Control".
You
can
use
this
function
by
connecting
the equipment with
an
HOMI
cable. See the operating
instructions
for
connected equipment
for operational details,
eVIERA
Link "HDAVI Control", based
on
the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control).
is
a unique function that we have developed and added. As such, its operation with other manufacturers' equipment that
supports HDMI CEC cannot be guaranteed.
eThis
unit
supports
"HDAVI Control
3"
function.
"HDAVI Control 3" is the newest standard (current as
of
December, 2007) for Panasonic's HDAVI Control compatible equipment. This standard
is
compatible with Panasonic,s conventional HDAVI equipment.
ePlease refer to individual manuals for other manufacturers' equipment supporting VIERA Link function.
Preparation
1) Connect this unit to your TV or amplifier/receiver with an HDMI cable
(~
11-12).
2) Set "VIERA Link" to "On"
(~
32). (The default setting is "On",)
3) Set the "HDAVI Control" operations on the connected equipment (e.g., TV).
eWhen using HDMI2terminai
of
VIERA as "HDAVI Contro''', set
the
input
channel
to
HDMI2
on
VIERA.
4) Turn on all
"H
DAVI Control" compatible equipment and select this unit's input channel on the connected TV so that the "HDAVI Control"
function works properly.
Also
when the
connection
or
settings are changed, repeat
this
procedure.
Power off link
When the following operations are performed, the television will automatically switch the input channel and display
the corresponding action.
- When play starts on the unit
- When an action that uses the display screen
is
performed
(e.g., Direct NaVigator screen)
When the television
is
off and the following operations are performed, the television will automatically turn on and
display the corresponding action.
-When
play starts on the unit
-When
an action that uses the display screen is performed (e.g., Direct Navigator screen)
All connected equipment compatible with "HDAVI Control", including this unit, automatically turns off when you
switch the television off.
eThis unit automatically turns off even during playback
or
any other operation.
eWhen
[~]
(PLAY)
is
pressed on this unit for "Automatic input switching" or "Power on link", the playback image is not immediately displayed on the
screen and
it
may not be possible to watch the contents from where playback started.
In
this case, press
[~"l
or
[
........
] to go back to where playback started.
Playing music
continuously
even after turning
off
power
to
the television
When the unit
is
connected to a Panasonic TV (VIERA) that supports HDAVI Control 2
or
HDAVI Control 3 and
an
amplifier/receiver supports
VIERA Link, the unit
is
turned off if the power to the television is turned off, since "Power off link"
(¢
above) operates.
The following operations make it possible to keep the power
of
the unit on and to play music continuously.
(j)While playing music
Press [SUB MENU].
@Press
[.,
~]
to select "TV Power" and press [OK].
eSound may
be
discontinued for several seconds when the power to the television is turned off.
elf
the operation mentioned above is executed while audio is output from the television, the sound may not be output from the amplifier/receiver.
It is recommended to set the amplifier/receiver beforehand so that audio will be output from the amplifier/receiver.
\
!
~~)
'---------------
RQT9243
To Next Page
Loading...
