Broadband
network
connection
.By
connecting this unit to a broadband connection, this unit can
support the BD-Live feature offered on some movie titles. SO-Live
offers additional interactive media and games that are associated
with the movie title.
(~
21)
.Once
connected to a broadband connection, this unit can also
automatically check for firmware updates.
Firmware updates
-_.
-_._~
Occasionally, Panasonic releases firmware updates for this BD
Player. Firmware
is
embedded software that controls this unit's
microprocessor. These updates may add or improve a feature of this
unit. Firmware updates may also be released
to
correct operating
irregularities that are discovered with certain movies. These updates
are available at no charge.
Internet
Automatically
check
the firmware .
CTlltlT
-r'
nfi I
This unit is capable of auto firmware check if it
is
connected
to
the
Internet via a broadband connection.
When latest firmware version is available, the following screen is
displayed.
Select "Yes"
or
"No".
.If
"Yes" is selected, then follow the on-screen instructions.
-II
"No" is selected, then manually update the firmware later.
(~
below)
After the latest firmware is downloaded, the system will be restarted
and the firmware will be updated.
When the system
is
restarted, the screen
display disappears and "START"
is
displayed
on the unit's display.
After the firmware
is
updated and the system is restarted, the
following screen indicates that the firmware update has been
completed.
Back
of
the
unit
Hub
or
broadband
router
(not included)
~.
Straight
LAN
cable
(not
includedr--
I
Telecommunications
equipment
(modem,
etc.)
• After physically connecting.this unit to your broadband connection,
some configuration is required.
(~
17)
.With
installation where your broadband modem is connected
directly
to
your PC, a router must be installed.
-In
case all available connection
on
your router is being used, a hub
or
switch can be installed to provide additional connections.
-Use
a router that supports 10BASE-T/100BASE-TX.
• Inserting any cable other than a LAN cable in the LAN terminal can
damage the unit.
• Use only shielded LAN cables when connecting to peripheral
devices.
- During the update process, no other operations can be performed.
Serious damage may occur if you turn the power off and/or press
any buttons.
- Downloading will require several minutes. It may take longer or the
Internet may not be connected depending
on
the connection
environment.
It
is
required that you use a broadband connection.
- When the unit is connected
to
the Internet, communication charges
may be generated.
-If
you
do not want
to
check for the latest firmware version when the
unit is turned on, set "Automatic Update Check" to "Off'.
(~
33)
Manually updating the firmware
If the firmware update is not carried out when the unit is turned on, a
message is displayed when displaying the FUNCTIONS menu.
The latest firmware is available.
Please update firmware in Setup.
~'1
.
..
J
You
can manually update the firmware.
1)
Press [SETUP].
2) Press
["',
T]
to select "Others" and press [OK].
3) Press
["',
T]
to select "Firmware Update" and press [OK].
4) Press
["',
T]
to select "Update Now" and press [OK].
5) Press [
....
,
~]
to select "Yes" and press [OK].
If
downloading
on
this
unit
fails
or
this
unit
is
not
connected
to
the
Internet,
then
you
can
download
the
latest
firmware
from
the
following
website
and
burn
It
to
a CD-R
to
update
the
firmware.
http://panasonlc.netlsupportl
(This site is in English only.)
AQT9243
To Next Page
Loading...
