Panasonic DMP-BD55 - Page 13

G Connecting to 5.1ch AUDIO OUT terminal I BOSS I
• "Analog Audio Output" should be set to "2ch
(Downmix)
+ 5.1ch". (~32)
• Using this connection. 7.1 channel surround
is mixed down to
5.1 channel audio.
.When connecting amplifier/receiver or other
devices with HDMI
AV OUT terminal, set
"HDMI
AUdio Output" to "Off". (~ 32)
(Otherwise, depending on the specifications
of connected devices, the audio from AUDIO
OUT terminal may be output as two channels
only.)
.When connecting a TV (~ 11,0) with HDMI
AV OUT terminal, set "HDMI Audio Output" to
"Off', (~ 32)
(Otherwise, the sound may not be output with
the desired audio.)
• Depending on how the disc was recorded, the
audio may not be output properly
on the
number of channels desired.
Cable
connections
e Front speaker (UR)
G) Surround speaker (UR)
G Center speaker
C!) Subwoofer
]
Amplifier/receiver with
5.1ch AUDIO IN
t
Back of the unit
Multi channel speakers
•
~ ==f===~~iiiii~~ii~==ftt;~ Connect Audio
cables to
'-.,. ...... terminals
corresponding
to
the speakers you
have connected.
(I Installation using Coaxial [B1555]/Optical Digital Audio connection
With COAXIAL Coaxial cable
_-II----<C}
-- f--'-'
~qc~~L 0 0 ~PUf~"~oe;,~}
~ :' l built-In decoder or a
Back of the unit decoder-amplifierl
receiver combination
• Please set "Digital Audio Output" to the
connection you will use, coaxial
or optical
digital.
(~ 31)
• When connecting a TV
(~ 11, 0) with HDMI
AV OUT terminal, set "HDMI Audio Output" to
"Off. (~32)
(Otherwise, the sound may not be output with
the desired audio.)
With OPTICAL
Back of the unit
Optical digital audio cable ®
' 0 OP;L1N
~iElil~,.~P,~Lill.iE!i~' ~, lit =f:::::=======~1!'!!t~~...,ill.,xm~!..ij'll
\ i /
., o~=JQ,O, ~P,,~,/~~,e,w~
built-in decoder or a
decoder-ampllflerl
receiver combination
AC power connection .
• For best results this unit should be connected
Cooling fan
directly to an AC outlet.
JI ., • . ,,·.~n,'
_""-l.(.,. ... ~
~~Isa
=~:d
• This unit consumes a small amount of AC
1IIIl:S.16'.·:.,~
86<:;':;>66
power (less than 0.6 W) even when turned off.
_0
0
"!~
00
~g~~~8
In the interest of power conservation, if you
Ctl
will not be using this unit for an extended
Back of the unit
AC power supply cord (inCIUded) __ !
period of time, it can be disconnected.
To a household AC outlet +
(AC 120 V, 60 Hz)
AQT9243