l;.18
""·L~,_./·
RQT9243
Network settings
Setting the connection speed
When the connection test results
in
"Fail" after the
IP
and DNS-IP
addresses are assigned, perform the following settings.
After performing steps
0-0
(~
17)
o Press [
..
,
-.]
to
select"
Auto Detect
Connection Speed" and press
[~,
~]
to select "Off".
o Press [
..
,
-.]
to select "Connection
Speed Setting" and press
[~,
~]
to
select a connection speed.
-Select
a connection speed
in
accordance with the environment of
the network connected.
-When
the settings are changed. the network connection may be
disabled depending on the device.
Setting the proxy server
.
..
- .
In
most cases, default settings can normally be used without making
any changes.
Please use this setting when instructed to
by
your Internet service
provider.
o Press [SETUP].
f)
Press [
..
,
-.]
to select "Network"
and press [OK].
e Press [
..
,
-.]
to select "Proxy
Server Settings" and press [OK].
o Press [
..
,
-.]
to select "Proxy
Address" and press [OK].
o Press [
..
,
-.,~,~]
to select a
character and press [OK].
Text field: shows the text
you
have entered
Pro""
Address
Using the numbered buttons to enter characters
e.g., entering. the letter "F"
Jil
l!
3 3 [
3 3 D E F [
[]
ill]
[[]
OJ
[
1)
Press [3] to move to the 3rd
row.
2) Press
[3)
twice to highlight
OF".
3) Press [OK).
Repeat this step to enter other characters.
• Press
[II] to delete.
o Press
[.]
when you complete the
entry.
G Press [
..
,
-.]
to select "Proxy Port
Number" and press [OK].
o Enter numbers with the numbered
buttons and press [OK].
o Press
[~,
~]
to select "Yes" and
press [OK].
- The specified ports may be blocked and not be able to be used
depending on the network environment.
In
order to restore the default settings
After
performing
steps
o-e
1)
Press
[.A.,
"'j to select "Reset
to
factory preset" and press [OK).
2)
Press [... ,
..
) to select "Yes" and press [OK].
To Next Page
Loading...
