To
select these
options,
perform steps
0-0
(~
30)
"Video"
Still Mode (paused video)
[]iJ!.UmBmJ
IilB!I
-Au..\Q
Select the type of picture shown when you pause playback
-Field:
Select
if
jittering occurs when "Auto"
is
selected. (The picture
(c:)
46, Frames and fields).
is coarser.}
- Frame: Select
if
small text or fine patterns cannot
be
seen clearly
when "Auto" is selected. (The picture is clearer and finer.)
Seamless Play
m!liI!lII
-On:
The chapters
in
playlists are played seamless/y. This does
Select the play mode between playlist chapter segments and partially not work while searching or when there are several audio
deleted titles. types included
on
the playlist. Additionally, the positioning of
chapter segments may change slightly.
-Off:
The points where chapters
in
playlists change are played
accurately, but the picture may freeze for a moment.
Black Level Control
-Lighter: When video is output from VIDEO OUT terminal.
Select lighter or darker for adjusting the black level control to the
-Darker:
When video
is
output from COMPONENT VIDEO OUT
desired setting for picture enhancement. terminal.
"Audio"
Dynamic Range Compression
miD
D!lim11ilB!1
mI!3
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range
(c:)
46} for late night viewing.
Digital Audio Output
(q
B)
- Press [OK]
to
show the following set1ings.
-On
-Auto:
-00
Effective only when Dolby TrueHO is played.
Dolby D/Dolby D +/ Select whether Dolby Digital, Dolby
Dolby TrueHD Digital Plus, Dolby TrueHD, DTS
DTS/DTS-HD Digital Surround, DTS-HD High
Resolution Audio or DTS-HD Master
Audio is output
in
"Bitstream" or
"PCM" format.
-Not
making the proper settings may
result
in
noise.
-If
the unit is connected with the
HDMI
AV
OUT terminal, the
specifications of the connected
equipment take preference over this
unit and audio selected
in
these
items may not
be
output (e.g., when
a television
is
connected, the HDMI
audio output of this unit is limited to
down-mixed 2ch.)
BD-Video Secondary Audio miD
Turn
on/off the clicking sound
on
the menu and audio with
secondary video
in
picture-in-picture mode.
(c:)
21}
PCM
Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
more.
-Signals
are converted to 48 kHz despite the set1ings across in
the following cases:
-when
the signals have a sampling frequency of over 96 kHz
-when
the disc has copy protection
-when
"BD-Video Secondary Audio" is set
to
"On"
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
-When
"Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD"
is
set to "Bitstream", there are no downmix effects for the outputted
audio.
- The audio will
be
outputted
in
"Stereo" in the following cases.
-AVCHD
playback
- Playback of clicking sound on the menu and audio with
secondary video in picture-in-picture mode
- Bitstream:
Select "Bitstream" when the connected equipment can decode the
respective audio format.
-Connect
equipment supporting HOMI (High Bit rate Audio) and use a
High Speed HDMI Cable
in
order to output high bit rate audio such as
Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or
DTS-HD Master Audio.
-PCM:
Select ·PCM" when the connected equipment cannot decode the
respective audio format.
Refer to the operating instructions for connected devices to verify whether or
not they can decode each of the audio formats.
-On:
The primary audio and secondary audio are mixed and output. The
sampling frequency is converted
to
48 kHz.
-Off:
The clicking sound on the menu and secondary audio are not
output.
-On:
Signals are converted to 48 kHz. (Choose when the connected
equipment cannot process signals with sampling frequency of
96
kHz.)
-00:
Signals are output as 96 kHz. (Choose when the connected
equipment can process signals with sampling frequency of
96 kHz.)
-~:
When connected
to
equipment that does not support
the virtual surround function.
-Surround encoded: When connected
to
equipment that supports the
virtual surround function (Dolby Pro Logic, DTS
Neo:
6,
etc.).
I
I
!
, J
\
31))
~-~~
.-
.•..
_..
_~
....
/
RQT9243
To Next Page
Loading...
