Regarding 24p output
1mB
Many BD-Video movie contents are recorded
in
24 frames/second
in
accordance with the film materials. However, they will normally be output in
60 frames/second
in
accordance with the display format.
These can be output
in
24p as the original. Therefore, high-quality video can
be
enjoyed, such as the improved clarity, enhanced perspective, etc.
NECESSARY CONNECTIONS
-Connect
to a TV supporting 1080/24p input via
an
HDMI cable.
NECESSARY SETTINGS
-"24p
Output"; "On"
(~
32)
Necessary settings
- . - - . .
After connecting to the terminals, perform necessary settings.
-
PCMo-e-on
_
DOwnalI.
_
DI
Itil
AudIo OUtput
. "
.,
,
"
.
~.
'.'
~
~
, "
~
"
.'
~"
•
~
'c.
'.
•
.~
<~~'J";;;;~;Y'?~,<,,),.:.
>
1)
While stopped
Press (SETUPj.
2) Press
[.&.,
~j
to
select "Audio" and press [OKj.
3) Press
[.&.,
~jto
select "Digital Audio Outpuf' and press [OK).
4) Press
["',
~]
to
select "Dolby D/Dolby D +/Dolby TrueHD", "DTS/DTS-HD",
or
"BD-Video Secondary Audio" and press
[~,
~ 1to select the option.
1)
While stopped
Press [SETUP].
2)
Press
[A,
~]
to
select
''TV
/ Device Connection" and press [OK].
3)
Press
[.&.,
~]
to select "Analog Audio Outpuf' and press [OK].
4) Press
[.&.,
~l
to
select the option and press [OK].
5) Press [OK].
-The
channel selling screen is displayed.
(~
34)
- For more information about settings, refer
to
page 31, 32,
34.
-When
using the different terminal at the same time, the sound may not
be
output with the desired audio if the setting is incorrect.
In the following case, set "HDMI Audio Output"
to
"Off",
(~
32)
- When connecting a compatible amplifier/receiver using 7.1ch AUDIO OUT/5.1 ch AUDIO OUT terminals, and connecting a compatible television
using HDMI
AV
OUT terminal
- When connecting a compatible amplifier/receiver using both 7.1ch AUDIO OUT/5.1
ch
AUDIO OUT terminals and HDMI
AV
OUT terminal if
outputting the audio from analog terminals
- When connecting a compatible amplifier/receiver using DIGITAL AUDIO OUT terminals, and connecting a compatible television using HOMI
AV
OUT terminal
To
return
to
the
previous
screen
Press [RETURNj.
To
exit
the
screen
Press [SETUPj.
RQT9243
To Next Page
Loading...
