Panasonic DMP-BD80 - Audio Connection details; Digital and Analog audio output connections

Connections
Digital Audio Connections
Television
•
Multi channel speakers
HDMIIN
~------~---~"~--'-'--'-'-------~-' -,---_._-----------,
Connecting to HDMI AV OUT terminal I-"HOMI Video Mode" and "HOMI Audio Output"
should be set
to "On" (~34)
I
-"Oigital Audio Output"" . Depending on the
connected amplifier/receiver
(~ 33)
-The HOMI connection supports VIERA link
I 'HOAVI Control" (~ 28) when used with a
compatible Panasonic
TV
i -Enjoying High Bit rate Audio of BO-Video
: (~8)
I
I
Ie
I
- Please set "Digital Audio Output" to the
connection you will use, coaxial or optical
digital.
(~ 33)
-When connecting a TV (~ 11,0) with HOMI
AV OUT terminal, set "HOMI Audio Output" to
"Off', (~ 34)
(Otherwise, the sound may not be output with
the desired audio.)
]
Amplifier/receiver
OR
'---------1"1 --~.;:'~
Optical digital audio cable
e Connecting to Digital Audio Output terminal
With COAXIAL (poso) or OPTICAL Coaxial cable
1==:::1--,
Back of the unit =f='---------- _-" ='
.l--.J.
1
Analog Audio Connections
"" - - - ~
G Connecting to 7.1ch AUDIO OUT terminal B080
Multi channel speakers
•
Back of the unit
r= Jl
Amplifier/receiver
-"Analog Audio Output" should be set to
·'7.1ch".
(~34)
-Enjoying High Bit rate Audio of BO-Video
(~ 8)
•
When connecting amplifier/receiver or other
devices with HOMI AV OUT terminal. set "HOMI
Audio Output" to "Off' (~ 34)
(Otherwise. depending on the specifications of
connected devices, the audio from AUDIO OUT
terminal may be output as two channels only,)
I
- When connecting a TV (~ 11. 0) with HOMI
AV OUT terminal. set "HOMI Audio Output" to
"Off', (~ 34)
(Otherwise. the sound may not be output with
the desired audio.)
- Depending on how the disc was recorded, the
audio may not be output properly
on the
number of channels desired.
Cable
connections
o Surround back speaker (UR)
4) Front speaker (UR)
G Surround speaker (UR)
C!» Center speaker
o Subwoofer
12
ROT9378