A
antoniobellJul 26, 2025
How to fix no sound on my Panasonic DMR-E30S?
- JjmcdonaldJul 26, 2025
If you have no sound on your Panasonic DVR, or experience low or distorted sound, first check the connections and the input mode on the amplifier if one is connected. If the distortion is caused by V.S.S., turn it off. Press [AUDIO] to select the desired audio type. In the SETUP menus, go to Audio and choose the correct setting with “Select MTS for DVD-R or LPCM”. If you are using a digital connection, set “Dolby Digital” to “PCM” or use audio cables (analog connection). Note that you cannot change the audio type when using DVD-R or LPCM recordings.