Panasonic DMR-E75VP - Page 20

Error
Code
Diagnosis contents Description Monitor
Display
FL display
F00 No error information Initial setting for error code in
memory
(Error code Initialization is
possible with error code
initialization and main unit
initialization.)
No display
Displayed is left.
F58 Drive hardware error Display appears when drive unit
error is detected. The event is
saved in memory.
No display
Displayed is left.
F34 Initialization error
when main
microprocessor is
started up for program
recording
Display appears when
initialization error is detected
after starting up main
microprocessor for program
recording. The event is saved in
memory.
The power is turned off when
detecting.
No display
Displayed is left.
UNSUPPORT
Unsupported disc
error
*An unsupported format disc
was played, although the drive
starts normally.
*The data format is not
supported, although the media
type is supported.
*Exceptionally incase of the disc
is dirty.
“This disc is
incompatible.”
Display for 5 seconds.
39