Panasonic DMR-E80HP - Power supply +5 V Adjustment Procedure; Assembling and Disassembling; Disassembly flow chart

Item Contents Item Contents Check
Picture Sound
Block noise Distorted sound
Crosscut noise noise (static, background noise,
etc.)
Dot noise The sound level is too low.
Picture disruption The sound level is too high.
Not bright enough The sound level changes.
Too bright
Flickering color
Color fading
7.2. Power supply +5V Adjustment Procedure
1. When the T001, Q003 and D103 is replaced, adjust the “XSW5V”
measuring point (IP102-2) in the VR102 to the value between 5.12-
5.15V.
8. Assembling and Disassembling
8.1. Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal
inspection when carrying out the servicing.
To assemble the unit, reverse the steps shown in the chart below.
15