Panasonic DMR-E80HP - Test Mode

Item FL display Key operation
Mode name Description Remote controller
key
Main unit
initialization
All parameters
(including timer) are
initiaized to the factory
setting.
[9] [9] while in service
mode
10.2.2. Other special modes
Item FL display Key operation
Mode name Description Remote controller
key
TEST Mode *All the main unit’s
parameters are
initialized.
*Since a drive region
is not specified [0] on
replacement drives, it
is specified when the
drive is replaced.
When the power is off,
press
SKIP(R), TIME SLIP and
OPEN
CLOSE simultaneously for
five
seconds.
Rating password The audiovisual level
setting password is
canceled.
--- Open the tray, and press
SKIP(
and SKIP(L)
simultaneously
five seconds.
Demonstration Lock Ejection of the disc is
prohibited.-
--- Press the OPEN/CLOSE
button,
and make sure that [
LOCK]
displayed. Then, with the
power
on, press STOP and
POWER
simultaneously for five
seconds.
Forced disc eject Removing a disc that
cannnot be ejected.
--- When the power is off,
press
STOP and CH_UP
simultaneously for five
seconds.
Progressive
initialization
The progressive
setting is initialized.
--- In STOP(EE) mode, press
CH
and CH DOWN
simultaneously
for five seconds.
ATP initialization The ATP setting is
initialized.
--- In STOP(EE) mode, press
STOP
and TIME SLIP
simultaneously
for five seconds.
Aging See the * Aging
Description below.
--- When the power is off,
press
TIMEWARP + OPEN /
CLOSE
CH DOWN simultaneously
for
five seconds.
* Aging Description
35