Panasonic DMR-E80HP - Page 34

Item FL display Key operation
Mode name Description Remote controller
key
Factors which
cause drive error
The disc condition is
displayed when an
error occures.
[4] [4] while in service
mode
Disc manufacture ID Display the
manufacture’s ID for a
disc on which a drive
error has occured.
[4] [5] while in service
mode
Illumination of all FL
/LEDs
All FL and LEDs are lit
up.
[5] [1] while in service
mode
S1 signal output Forcibly superimpose
the S1 signal (5V DC)
on the EE chroma
signal, and check the
output on the S
terminal.
[5] [2] while in service
mode
S2 signal output Forcibly superimpose
the S2 signal (2.2V DC)
on the EE chroma
signal, and check the
output on the S
terminal.
[5] [3] while in service
mode
Front connection
inspection
Press all the main
unit’s buttons and
check the connection
with the Main P.C.B..
[5] [4] while in service
mode
Tray OPEN/CLOSE The RAM drive tray is
opened and closed
repeatedly.
[9] [1] while in service
mode
* AC power should be
turned
to release this
operation.
Error code
initialization
Initialization of the last
error code held by
timer (Write in F00)
[9] [8] while in service
mode
34