Panasonic DMR-E80HP - Service Positions; Checking procedure; Checking the Digital P.C.B.; Service tools

9. Service Positions
9.1. Checking procedure
Note:
For the disassembling procedure, see the section 8.
9.2. Checking the Digital P.C.B.
1. Remove the Top Cover.
2. Remove the FFC (ATAPI - Digital P.C.B.).
3. Remove the FFC (RAM Drive - Digital P.C.B.)
4. Remove the Digital P.C.B.
5. Use the extension cable (RFKZ0164) to connect the Main P.C.B.
and Digital P.C.B.
6. Use the extension FFC (RFKZ0125) to connect the RAM Drive and
Digital P.C.B.
7. Connect the ATAPI and Digital P.C.B.
Service tools
Extension FFC
(RAM Drive - Digital
P.C.B.)
RFKZ0125 (40Pin)
Extension Cable
(Main P.C.B. - Digital
P.C.B.)
RFKZ0164 (30Pin x 3)
24