9.3. Checking the Main P.C.B.
1. Remove the Top Cover.
2. Remove the Front Panel.
3. Remove the Rear Panel.
4. Remove the Power Supply P.C.B., Main P.C.B. and RAM Drive and
HDD.
5. Use the extension cable (RFKZ0168) to connect the Main P.C.B.
and Fan Motor.
6. Use the extension cable (RFKZ0169) to connect the HDD and
Power supply P.C.B.
7. Connect the Power Supply P.C.B., Main P.C.B. and RAM Drive and
HDD.
8. Install to the service positions views.
9. Use the extension cable (RFKZ0165) to connect the Main P.C.B.
and Front P.C.B. (L).
10. Use the extension cable (RFKZ0166) to connect the Power supply
25
To Next Page
Loading...
